close
close

John Deere Gator 44″ Cutting Width Briggs 27HP Rough Cut Mower by Kunz

SKU: MR44B-EJD
$4,429.95
In Stock: Ships in 2-3 Days
Shared Shipping: Additional shipping charge of $299.99 will apply
90 Day Free & Easy Returns
Not completely satisfied? Return or exchange within 90 days for a refund
Best Price Guarantee
Shop with confindence - if you find it cheaper, we'll match the price

Brand
Kunz
SKU
MR44B-EJD
MPN
MR44B

44″ rough cut model with a non-commercial grade single cylinder electric start engine and manual clutch blade engagement. Works great behind an ATV for smaller acreage jobs or tight clearance conditions.

44" Rough Cut Mower Features:

  • 44″ Cutting Width
  • 19 HP Briggs & Stratton Engine
  • Commercial Grade Deck Assembly
  • 4 Tire Design
  • Quick Single Crank Height Adjust System
  • Height Adjustment Range From 2″ to 8″
  • Manual Clutch Blade Engagement
  • Conservative 2″ Diameter Sapling Rating
  • Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.

Specification

Class MowerRough Cut (Rear Discharge)
Engine MakeBriggs & Stratton
Engine ModelIntek Professional OHV
Engine HP19
Lubrication MethodPressure with Filter (Low Oil Pressure Shut Off Included)
Electric Start (Battery not included)Yes
Number of Mower Blades2-23"
Blade Tip Speed (ft/min)19,000
Cutting Width44"
Cutting Height2.0" - 8.0" With Single Crank Assy.
ATV TongueStandard (Direct Behind or Full Offset to Either Side)
Blade Engagement ClutchManual
Deck Metal Thickness8 GA
Deck Top Plate Thickness7 GA Backed with 1/4" Plate at Blade Spindles
Weight520 lbs
Pneumatic Fixed Rear Tire - Note: Flat Proof Urethance Tire Upgrade Available15/600x6, 4 Ply Tubeless
Pneumatic Front Tires on Casters - Note: Flat Proof Urethance Tire Upgrade Available5.30/4.50x6, 4 Ply Tubeless
Fuel Tank Size3 Gal.
Blade Spindles
Shaft Size30mm
Bearing #6206-2RST
Drive Method1 B Section "V" Belt
Warranty Year Commercial (Engine - 2 Year Residential / 1 Year Commercial)

 

The Wetlands Kit consists of an extra set of tires and mounting brackets

  • Great for wetlands or marshy areas that stay wet all year around
  • Works well in combination with small personal amphibious vehicles
  • Kit more than doubles the tire surface area in contact with the ground
  • Easy to install
  • Works on all existing and new rough cut mowers
  • The rough cut mower will not float with the wetlands kit installed. Water greater than 2-3" in depth should be avoided.
  • With the Wetlands Kit installed the minimum cutting height is 3.5"-4".

The Electric Lift Kit consists of all of the mounting hardware, brackets, electric actuator and wiring with remote control panel.

  • Great for constantly changing terrain and grass/brush heights
  • Allows for quick cutting height changes on the go from the seat of the tow vehicle
  • Raise up and over rocks and logs with ease
  • Heavy duty 1500 lb linear screw actuator made by Linak
  • Works on all existing and new rough cut mowers

The Floatation Kit consists of one additional front and rear tire, mounting brackets and hardware

  • Great for mowing around ponds and on rough uneven ground where scalping would normally occur
  • Clamping style receiver allows for adjustments from side to side with both the front and rear tires
  • Pinned receivers make for quick kit removal when not needed
  • Works on all existing and new rough cut mowers

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Kunz AcrEase Pull Behind Rough Cut Mower Towed By An ATV

Kunz AcrEase 57" Pull Behind Rough Cut Mower Pulled By A UTV

Mowing Saplings With A Kunz AcrEase Pull Behind Rough Cut Mower

Mowing Ditches with a Kunz AcrEase Pull Behind Rough Cut Mower

Ask a question Not seeing your machine covered? Ask — the answer posts here for the next rider.

The Everything Advantage

John Deere Gator is all we do

No catch-all catalog, no guessing. If it's on this page, it was picked because it belongs on your machine.

Real John Deere Gator experts

Talk to someone who knows an HPX from an XUV. Fitment questions, install advice, straight answers.

Guaranteed fitment

Set your year and model once and we only show what bolts on. If it doesn't fit, we make it right.

Most items ship in 24 hours

Ordered today, out the door tomorrow on the vast majority of parts, with deep in-stock inventory behind it.

Risk-free 90-day returns

Ride it, test it, be sure about it. Ninety days to send it back, backed by our 100% satisfaction guarantee.

Trusted by 1 Mil+ Powersports Customers Since 2010
Call (920) 268-4355 Mon–Fri 8:00am–6:00pm, Sat 9:00am–3:00pm CST
Text (920) 644-5280 Fastest way to get a fitment question answered
Email customerservice@everythingdeeregator.com Replies within one business day